Timber Frame - Internal

SuperFOIL is installed over the timber wall studs horizontally or vertically, using the correct size galvanized or stainless-steel staples at 300mm intervals. Care should be taken to ensure that any overlaps are at least 50mm and are taped over with 100mm Superior Foil Tape. SuperFOIL should be sealed to other air and vapour barriers at floors and roof junctions. The products are then further held in place by the correct size timber battens installed horizontally at no greater than 600mm centres. Timber battens should always be installed around the perimeter of floors, roofs, windows and doors. Plasterboard is then fixed to the timber battens in accordance with the manufacturer's guidance. For maximum performance, SuperFOIL should be installed with two unventilated cavities.