SuperCLOSE can be Installed In a variety of ways:
- Tack to window frame if built in.
- Built-in as work progresses friction fitting.
- SuperCLOSE can be installed after the reveal has been constructed by fixing the inner leaf using grab adhesive.
If required, sections of SuperCLOSE can be jointed to minimise waste.
All joints must be tightly butted - 45 degree downwards the outer leaf.
This will stop potential water penetration.
When jointing horizontal to vertical, trim both PVC flanges and allow the vertical to extend below the horizontal - this stops water ingress.
Measure the structural opening
Cut profile to required length
Measure the cavity width
Cut the insulation to the required width
Fixed in place with clout nails or grab adhesive
Save Yourself Time and Money by choosing the right insulation for the job!
50mm to 100mm
100mm to 150mm
|Insulation Width||Length||Thickness||Pack Quantity||Pallet Quantity||Pack Weight|
|SC100||50 - 100mm||2.4m||20mm||10||400||10kg|
|SC150||100 - 150mm||2.4m||20mm||10||300||10kg|
|Thermal Conductivity||0.034 W/mK||EN 13163|
|Minimum Thermal Resistance||0.877m²K/W||IP 1/06|
UNSURE WHERE TO START?
Our FREE guide gives you all the information on saving time and money when insulating your home, and how to really make a difference to the comfort of your rooms.